Introduction
Network Scope is a portable network discovery and inventory tool written in Rust. One code base provides three front ends:
- an egui desktop app (
network-scope.exeon Windows), - a scriptable CLI (
network-scope-cli.exeon Windows, a console-subsystem build of the same program), - a ratatui live terminal view (
scan --tui).
It finds the hosts on a network, identifies their services, TLS and SMB configuration, operating system family, manufacturer and device type, derives risk findings and version-based CVE hints, and stores every run in a local SQLite inventory. Snapshots can be compared, exported (HTML, Markdown, JSON, JSON Lines, CSV, nmap XML) and monitored over time with alerts.
Network Scope has a strong focus on industrial (OT) networks: Modbus/TCP, S7, EtherNet/IP, BACnet/IP and OPC UA devices are identified with read-only requests only, and a passive mode reads pcap/pcapng files or a live interface to build an OT asset inventory without transmitting anything. Safe Mode is enabled by default.
Normal TCP connect scans work without administrator rights or Npcap.
What it is not
- It is not a vulnerability scanner. CVE entries are hints derived from version strings; distributions backport fixes without changing versions.
- It is not a drop-in replacement for other scanners. It reads and writes nmap XML for interchange only.
- It does not exploit, authenticate, write to devices or change device configuration.
Status
Version 0.5. The changelog lists what changed and, importantly, what has not been tested. In short: everything that needs Npcap/libpcap on a real interface (SYN, ARP sweep, TCP traceroute, live capture, DCP) has only been tested against a fake wire, the OT decoders only against synthetic frames, and no live production network was scanned during development.
Where to go next
- Installation and Quick start
- Responsible use and Safe Mode and OT safety, before scanning anything you do not own
- CLI reference for every command and option